Factory For test liner paper making chemicals - 15% Akd Netural Sizing Agent – Tiankai
Factory For test liner paper making chemicals - 15% Akd Netural Sizing Agent – Tiankai Detail:
The active ingredient of this product is carbon fourteen-carbon hexadecyl ketene dimer, and AKD emulsion is a reactive neutral sizing agent, which can be directly used in paper mills for internal sizing of neutral papermaking.
In addition to the characteristics of self-retention and high water resistance, it speeds up the curing speed and improves the sizing effect. It has a good improvement on other technical indicators of the paper, and can greatly improve the physical properties of the paper.
It can be applied to paper types that require sizing such as writing paper, offset printing paper, cardboard paper, corrugated paper, xerographic paper, copperplate base paper, etc.
Technical index：
| Appearance | White emulsion |
| Solid content | 15.0±0.5 |
| Viscosity，mPa•s(25)℃ | 15 |
| pH value | 3-5 |
| Water solubility | easy soluble in water |
| Ionic | Cationic |
Performance characteristics
1. This product can impart high water resistance to paper, improve the gloss and strength of the paper, have low yellowing value, and reduce the brittleness of the paper.
2. Improve the printability of paper, increase the retention rate of fine fibers and fillers, and reduce pulp consumption.
3. Simplify the sizing process, improve the papermaking performance of the paper machine, will not produce papermaking obstacles, and the curing speed is fast.
4. Neutral papermaking reduces equipment corrosion and prolongs equipment service life
Instructions for use:
This product can be used in a wide range of PH value (6-9), suitable for wood pulp, bamboo pulp, recycled paper pulp, wheat straw pulp, reed pulp, cotton stalk pulp, etc.
The general sizing requirement is 7-15 kg/ton of paper. It is usually added in the slurry box or mixing box through the metering pump when it is used.
Before using this product, if it is a prerequisite for acid papermaking, the equipment and pipes should be cleaned. When the slurry PH value is less than 6, a small amount of soda ash or caustic soda can be added to adjust.
Packaging and transportation:
Packed in 1000kg plastic drum, or transported in tank truck.
This product is non-hazardous. Avoid high temperature, sunlight, freezing, and leakage during transportation, and rinse with water.
Storage period: 4 months.
Precautions
1. The pH value of the head box is controlled from 7.0 to 8.5, if it is lower than 7.0, it can be adjusted by adding alkali.
2. The paper mill should choose the best ratio, place and method of joining according to the specific situation.
3. Make sure that the temperature of at least one drying cylinder of the paper machine is not lower than 95℃.
4. When changing from acid paper to medium alkaline paper, the equipment and pipes should be thoroughly cleaned.
5. Before use, if AKD emulsion is found to be stratified, thickened, and a large amount of gas is released, stop using it immediately. If you have any usage problems, please contact the supplier.
Product detail pictures:
Related Product Guide:
The incredibly rich projects administration experiences and a person to 1 service model make the substantial importance of organization communication and our easy understanding of your expectations for Factory For test liner paper making chemicals - 15% Akd Netural Sizing Agent – Tiankai, The product will supply to all over the world, such as: Boston , Australia , Dubai , Our solutions have national accreditation standards for experienced, premium quality goods, affordable value, was welcomed by people around the globe. Our products will continue to increase in the order and look forward to cooperation with you, Truly must any of people goods be of interest to you, make sure you letus know. We're likely to be delighted to give you a quotation up on receipt of one's in depth specs.
By Beulah
from Ukraine
- 2017.11.29 11:09
This enterprise in the industry is strong and competitive, advancing with the times and develop sustainable, we are very pleased to have a opportunity to cooperate!
By Mark
from Morocco
- 2018.12.11 11:26